Panasonic Electric Works Networks Co., Ltd. > Support
> FAQs > About Specifications
ここから本文です。
About Specifications
FAQs About Specifications for L Series /PoE Series/eG Series Ethernet Switches
About Specifications
- Can spanning tree be used in combination with the Internet Mansion function?
- Can link aggregation be used in combination with the Internet Mansion function?
- How many uplink ports can be created if the Internet Mansion function is enabled?
- Is a mail server required within the network in order to make the e-mail notification function available? Or, does the product have a mail server function?
- Which switches are equipped with the Telnet server function?
- Can IP address be restricted when accessed by Telnet?
- Are login name and password reflected in the Config information?
- The 802.1x function is provided by port based authentication and MAC based authentication. How is operation effected by type of authentication?
- Is port based authentication used for the dynamic VLAN function and guest VLAN function?
- Does the traffic graph of the Web Management function show the value for packets received by the port, or packets sent by the port?
- Is communication control using MAC address by switch possible?
- What sort of security is used when accessing switches?
- What is the power consumption of the Ethernet Switch? How much heat does the Ethernet Switch generate?
- Can ports with extension module slots such as Switch-M24PWR (e.g. Switch-M24PWR ports No. 25 and 26) be connected to SFP (GBIC) and UTP by cable and used simultaneously?
- Can the switch be mounted on the wall?
- Is RoHS Directive complied?
- How can the manufacturer's serial number of the product be checked?
- How can the switch be accessed?
- After setting modification, does it have to be rebooted to make settings effective?
- Does the product have a command to save settings after modification?
- Which models are equipped with SNMP function?
- How can I know the type and status of self diagnosis LED (STATUS) lamp?
- The product code has been changed from MN to PN. Does it mean there is a change in performance, functions, or anything?
- Can I access other switches from the logged in switch by Telnet?
- I connected the twisted pair port of MC1000SX to a 100M device but it does not link up.
- There are a SFP expansion slot port and a twisted pair port which have the same port number. Can both of them be used together?
- When Ethernet Switches are connected through a UTP cable, some ports can link up but others cannot. Why does such a difference exist?
- Is the reboot timer function automatically started after version upgrade?
- Can the reboot timer be used also for usual reboot?
- Is there a possibility of failure if the positive terminal and the negative terminal of the power source cable of Switch-M24DCPWR are connected in reverse?
- Can the time be set manually?
- I want to change the fan speed. How many degrees are available for changing the fan speed?
- Is there a recommended threshold value for storm control?
- Can the port be shut down if the threshold value of storm control is exceeded?
- What is the difference between "Loop prevention function" and "Loop detection and shutdown function"?
- I want to get config by running the show run command but long logs cause pagers. Is there any way to get long logs without pagers?
- I want to change my password. How many characters can be specified at the maximum for it?
- The cost value of spanning tree can be found in config. Is it included by factory default?
- What is the maximum value that can be displayed for the statistical information counter?
- I want to know specifications of optical fiber cables which can be used for SFP modules and media converters.
- Are magnets shipped with the Ethernet Switch?
- How much switching capacity does the product have?
ここからサブメニューです。