Switch-S24GPWR (PN25249)

PoE compliant switch(L2 switch)
10/100/1000 Mbps 24 (PoE×24)
Product number of the end □ is country that corresponds to is displayed
□=A:Indonesia/-ID:Indonesia/-TH:Thailand/-MY:Malaysia/-SG:Singapore

Switch-S24GPWR(PN25249)
  • Firmware
  • ZEQUO assist Plus
  • PoE Timer
  • Data Download
  • Contact us
  • Switching Hub Search


Product

Product External dimensions Detailed information (PDF)
Switch-S24GPWR
(PN25249-□)
H44×W440×D256mm ■(PN25249-□)
   Dataseet
  Manual Menu / CLI / WEB
■Indonesia(PN25249-ID)
   Specification / Drawing
■Thailand(PN25249-TH)
   Specification / Drawing
■Malaysia(PN25249-MY)
   Specification / Drawing
■Singapore(PN25249-SG)
   Specification / Drawing

Indonesia

Model Name Model No. Status
Switch-S24GPWR PN25249-ID Now on sale

Thailand

Model Name Model No. Status
Switch-S24GPWR PN25249-TH Now on sale

Malaysia

Model Name Model No. Status
Switch-S24GPWR PN25249-MY Now on sale

Singapore

Model Name Model No. Status
Switch-S24GPWR PN25249-SG Now on sale

Summary

The Switch-S24GPWR is managed ethernet switching hub with Power Over Etherent function.
The Switch-S24GPWR has 24 10/100/1000BASE-T ports which have the IEEE 802.3af-compliant feeding power function.

Features

(1)1-24 ports
These are 10/100/1000BASE-T ports which support auto negotiation.
Or the speed and the communicate mode can be set by manual setting.
(2)As for 1-24 ports, feeding power in accordance with IEEE 802.3af is possible.
The feeding power is 15.4W or less per port.
And it is possible to feed power up to 124W in the entire equipment.
(3)Straight/cross cable automatic operation discrimination function is installed in all twisted pair ports.
Users can use straight cable regardless to consider the distinction between the terminal and the networking equipment.
(This function can no be used when port trunking is set.
By default, port 1-22 are set to the MDI-X setting at the factory shipment.)
(4)Users can connect from remote console using Telnet or Browser, and can check and change the setting of switching hub. Users can set PoE enabled/disabled from remote console for each port (port 1-24).
(5)By detecting the connection status, power saving mode automatically works, and control and eliminate to minimum the electricity consumption to the requirement.
(6)Max 256 VLAN group can be set by grouping ports using the VLAN function.
(7)The QoS function in accordance with IEEE802.1p is supported.
(8)DSCP-CoS mapping is supported.
(9)The port can detect network loop.
(10)The PoE port status can be changed by scheduler.
(11)Link Aggregation supports 8 port/group and 8 group/unit by manual mode..

s24gpwr

Go back to the top of the page