Release Notes The products covered by this release note are as follows: Product Name (Model Number) GA-MU8TPoE+ (ZLP91089) --------------------------------------- 30.Jan.2026 Version 2.03.17 New function 1. Added a Temperature Tolerance Mode that limits the power supply capacity to allow operation even in a 60 degrees Celsius environment. Correction points - Resolved Issues: 1. Fixed an issue where the behavior of port settings in monitor session differed between CLI and WEB UI. 2. Fixed an issue where the primary option was not included in the configuration file for the radius-server host command. --------------------------------------- 26.Mar.2025 Version 2.03.16 Correction points - Resolved Issues: 1. Add a command to register a static destination. (ip igmp snooping static-group) Configure it so that multicast traffic can be forwarded to the router port when multicast filtering is enabled. 2. The configuration of the facility option for the logging command can be retained after a reboot. 3. It is possible to change the QoS settings from the WEB UI without restoring to the default QoS settings. 4. Support IGMP snooping Ver.3. --------------------------------------- 11.Oct.2024 Version 2.03.11 Correction points Fixed the issue which multicast data could not be forwarded to the ports of link aggregation. Existing issues 1. When switching the QoS status Disabled/Enabled, QoS scheduler feature may not work correctly. Workaround: Please change the QoS configuration after rebooting the switch. 2. When multicast-filtering is enabled, the Switch does not forward multicast traffic to router port. Workaround: If you want to transfer multicast traffic to router port, please disable multicast-filtering configuration. 3. Facility option settings are not saved in the logging command options. Workaround: If you change facility options, please set them again after rebooting. 4DWhen multiple Radius servers are configured, it is not possible to connect to the second Radius server. Workaround: Please use only one RADIUS server. 5. If you change the QoS configuration on WEB UI, please restore the default QoS setting on WEB UI at first. Workaround: when user switches Scheduling Method from WRR to Strict Priority, user needs to set all the queue weight in WRR page to 0 first. 6. Not support IGMP snooping Ver.3. Please change to Ver.2 if you want to use IGMP snooping. Workaround: Please execute the following command in Global Configuration Mode. (config)ip igmp snooping global version v2