Switch-M16eGi(PN28160i) Release Note October 7, 2021 Version 3.0.0.03 - Resolved Issues: 1. If you configure "dot1x control-direction in", receiving packets are forword to other ports even though the port is not authenticated. June 11, 2021: Version 3.0.0.02 - Specification Changes: 1.The default value of Energy Efficient Ethernet (EEE) has been changed to Disable. - Resolved Issues: 1.When setting the threshold value of a storm control on the menu, the value is set to 0 after you press "Enter" without entering a (numerical) value. 2.The timing to implement an optimization of a file system 3.On the port (before authenticating the WEB) where the WEB authentication is enabled, obtaining an IP address through DHCP results in a failure. 4.A specific IP address cannot be set to a default gateway. 5.When the connection with an SNTP server is not available, CLI does not respond after you execute the "sntp updatehcommand. -Note You update to firmware version 3.0.0.02 or later, the Energy Efficient Ethernet (EEE) settings will be Disable. If you want to operate with EEE settings Enable, update to firmware version 3.0.0.02 or later and then enable EEE settings. October 1, 2019: Version 3.0.0.00 First release.