"ZEQUO assist Plus" readme.txt Thank you for downloading this application. This document describes the overview of and restrictions on ZEQUO assist Plus. Be sure to read it before using this application. * The latest version of this application is released in our website. https://panasonic.co.jp/ew/pewnw/english/ Before Using This Application =============================================================================== For the operation procedure and precautions for this application, refer to the included PDF file of the operation manual. To browse the PDF file, you need PDF viewer software such as Adobe Acrobat Reader. Download it from the following page and install it as required. Adobe Acrobat Reader download page (Adobe Inc.) https://get.adobe.com/uk/reader/ Also, operating this application requires Microsoft .NET Framework 3.5 SP1 or higher and less than 4.0. Download it from the following page and install it. Microsoft .NET Framework download page (Microsoft Corporation) https://dotnet.microsoft.com/en-us/download/dotnet-framework =============================================================================== Table of Contents ==================================================================== 1. Preface 2. File Organization 3. Operating Environment 4. Supported Part Name, Part Number, and Known Compatible Firmware 5. Installation and Uninstallation 6. Revision History 7. Disclaimers and Cautions ==================================================================== ============ 1. Preface ============ ZEQUO assist Plus (hereinafter referred to as this application) is a Windows application which combines operations and settings of our Switching Hub with various functions such as monitoring active devices. O Overview of the functions [Setting support] (1) IP address easy setting function The IP address easy setting function provides the following settings for the ZEQUO or MNO series Switching Hub supporting this function. - IP address - Subnet mask - Default gateway - Switch name Specific part numbers also support the following settings in addition to the above. - Port setting (Auto MDI/MDI-X, MNO series power-saving mode, Energy-Efficient Ethernet) - Upgrade - Initialize settings - Time limit of configuration changes accepted (2) ZEQUO initial setting function The ZEQUO initial setting function provides the following initial settings and the file management of the body Flash/SD card for the ZEQUO series Switching Hub. - Basic setting - Port setting - VLAN/IP address setting - Time setting - QoS setting - Link aggregation - IGMP Snooping/Querier - Static routing (except for ZEQUO 2200/2210/2400) (3) Easy restore function The easy restore function acquires and restores configuration information of the MNO series Switching Hub. (4) Terminal emulator function The terminal emulator function shows the Switching Hub setting screen and configures settings through the console/Telnet/SSH. (It can write a log displayed on the screen to a text file) [Operations support] (1) Operational monitor function The operational monitor function provides the following functions for network devices such as our Switching Hub. - Periodical Ping monitor Use a Ping to monitor life and death of a network device. (Devices other than our Switching Hub can be also monitored) - Log acquisition (except for some part numbers) This function acquires settings, system logs, and operating states of a Switching Hub. - Command transmission (except for some part numbers) This function transmits any predefined CLI command based on a schedule. - Collective upgrade (except for some part numbers) This function instructs target devices to upgrade. - Alert notification (e-mail, dialog, audio, command execution, SNMP trap) This function notifies the administrator of a Ping monitor error and particular Syslog message when they are received. - Configuration restoration This function restores a Switching Hub by way of network. - Syslog server This server function uses a Syslog protocol to aggregate system logs of a Switching Hub. - TFTP server This server function is used to upgrade a Switching Hub or to transfer configuration information. - SNTP server This server function is used to synchronize a Switching Hub Time ====================== 2. File Organization ====================== This application consists of the following files: \--+-- readme.txt - Overview of this application (this document) +-- ZEQUOASSIST.exe - Executable file of the application (ZEQUO assist Plus body) +-- NetworkManager.exe - Executable file of the application (operational monitor function) +-- OperatingManual.pdf - Operation manual of this application +-- license.txt - Software license file +-- en.ini - Configuration file +-- ja.ini - Configuration file +-- System.Data.SQLite.dll - Library file +-- ssh_known_hosts - Configuration file +-- terminal.exe - Executable file of the application (Terminal emulator) +-- Interop.NETWORKLIST.dll - Library file +-- ttpcmn.dll - Library file +-- ttpdlg.dll - Library file +-- ttpfile.dll - Library file +-- ttpset.dll - Library file +-- ttxssh.dll - Library file +-- TTXTerminal.dll - Library file +-- lang\ - Language definition files +-- en\ - Language definition files +-- plugin\ - Library files ========================== 3. Operating Environment ========================== - Known compatible OS: - Windows 7 Service Pack 1 (32bit/64bit) - Windows 8.1 Service Pack 0 (32bit/64bit) - Windows 10 Service Pack 0 (32bit/64bit) * The operational monitor function is known compatible in the following OS: - Windows Server 2008 R2 Service Pack 1 - Windows Server 2012 R2 Service Pack 0 - Windows Server 2016 - Necessary specifications: - CPU: 1 GHz or more (32/64-bit) - Memory: 1 GB or more - HDD: Free space of 1 GB or more (including capacity for .NET Framework redistributable package) - Screen resolution: XGA (1024 x 768) or higher - Others: - Microsoft .NET Framework 3.5 SP1 or higher and less than 4.0 - Ethernet communication port - Console port ================================================================================= 4. Supported Part Name, Part Number, and Known Compatible Firmware Version (*1) ================================================================================= Part Name Part Number Known Compatible Version IP Easy Setting ZEQUO Initial Setting ---------------- ----------------- ------------------------ --------------- --------------------- ZEQUO 6700RE PN36243E 1.0.0.00 O - ZEQUO 6600RE PN36241E 1.0.0.00 O - ZEQUO 6500 PN36242E 1.0.1.29 O O ZEQUO 6400 PN36240E 1.0.1.29 O O ZEQUO 5410DL PN88162C 1.0.0.00 O - ZEQUO 4600RE PN36241L 1.0.0.00 O - ZEQUO 4500DL PN36241C 1.0.0.00 O - ZEQUO 4400 PN36240L 1.0.0.38 O O ZEQUO 2600RE PN26241E 1.0.0.00 O - ZEQUO 2400 PN26240E 1.0.0.35 O O ZEQUO 2310 PN26161K 1.0.0.00 O - ZEQUO 2300 PN26241K 1.0.0.00 O - ZEQUO 2210 PN26161 1.0.0.25 O O ZEQUO 2200 PN26241 1.0.0.25 O O MGA-ML4TWPoE++ PN290496 1.0.0.01 0 - MXG-ML8THPoE++ ZLP290894 1.0.0.00 0 - GA-ML4TWPoE++ PN260496 2.0.2.02 0 - GA-MLD8TPoE+ PN260893D 2.0.1.06 0 - GA-MLD16TPoE+ PN261693D 2.0.1.06 0 - GA-ML48TCPoE+ PN264892 1.0.0.02 O - GA-ML24TPoE+ PN262493 1.0.0.00 O - GA-ML24TCPoE+ PN262492 1.0.0.00 O - GA-ML16TPoE+ PN261693 1.0.0.02 O - GA-ML16TCPoE+ PN261692 2.0.0.00 O - GA-ML12THPoE+ PN261294 2.0.0.00 O - GA-ML12TPoE+ PN261293 2.0.0.00 O - GA-ML8THPoE+ PN260894 2.0.0.00 O - GA-MLi8TPoE+ PN260893H 2.0.0.00 O - GA-ML8TPoE+ PN260893 1.0.0.00 O - GA-ML8TCPoE+ PN260892 1.0.0.00 O - GA-ML4THPoE+ PN260494 2.0.0.00 O - GA-MLi4TPoE+ PN260493H 2.0.0.00 O - GA-ML4TPoE+ PN260493N 1.0.0.00 O - GA-MS24T PN26244 1.0.0.00 O - GA-MS16T PN26164 1.0.0.00 O - GA-MS8T PN26084 1.0.0.00 O - Switch-M24eGi PN28240i 2.0.1.07 O - Switch-M16eGi PN28160i 2.0.1.07 O - Switch-M8eGi PN28080i 2.0.1.07 O - GA-AS24TPoE+ PN25248 1.0.0.00 O - GA-AS16TPoE+ PN25168 1.0.0.00 O - GA-AS12TPoE+ PN25128 1.0.0.00 O - GA-AS10TPoE+ PN25108 1.0.0.00 O - GA-ASW8TPoE+ PN25087 1.0.0.00 O - GA-ASW8TPoE+ PN25087K 1.0.0.00 0 - GA-AS4TPoE+ PN25048 1.0.0.00 O - GA-AS24T PN25241 1.0.0.00 O - GA-AS16T PN25161 1.0.0.00 O - GA-AS12T PN25121 1.0.0.00 O - GA-AS10T PN25101 1.0.0.00 O - GA-AS4T PN25041 1.0.0.00 O - GA-EMR48TPoE+ PN28489R 1.0.0.00 O - XG-M24TPoE+ PN83249 1.0.0.01 O - XG-M16TPoE+ PN83169 1.0.0.01 O - XG-M12TPoE+ PN83129 1.0.0.01 O - XG-M8TPoE+ PN83089 1.0.0.01 O - SK-EML24TPoE+ PN28248S 1.0.0.24 O - SK-EML16TPoE+ PN28168S 1.0.0.24 O - SK-EML12TPoE+ PN28128S 1.0.0.24 O - SK-EML8TPoE+ PN28088S 1.0.0.22 O - FA-ML24TCPoE+ PN232492 2.0.1.00 O - FA-ML16TCPoE+ PN231692 2.0.1.00 O - FA-ML12TPoE+ PN231293 2.0.1.00 O - FA-ML8TPoE+ PN230893 1.0.0.01 O - FA-ML4TPoE+ PN230493N 1.0.0.01 O - Switch-M12GL3 PN36120 - - - Switch-M24L3X PN33240K - - - Switch-M24DCPWR PN23249D 2.0.0.74 O - Switch-M24GPWR+ PN26249K 2.0.0.61 O - Switch-M24GPWR+ PN26249 2.0.0.52 O - Switch-M16eGPWR+ PN28169 1.0.0.52 O - Switch-M12eGPWR+ PN28129 1.0.0.54 O - Switch-M8eGPWR+ PN28089K 1.0.0.54 O - Switch-M8eGPWR+ PN28089 1.0.0.41 O - Switch-M5eGPWR+ PN28059K 1.0.0.51 O - Switch-M5eGPWR+ PN28059/MN28059 1.0.0.62 O - Switch-M24eGLPWR+ PN28248 1.0.0.11 O - Switch-M16eGLPWR+ PN28168 1.0.0.11 O - Switch-M12eGLPWR+ PN28128 1.0.0.11 O - Switch-M8eGLPWR+ PN28088 1.0.0.11 O - Switch-M5eGLPWR+ PN28058 1.0.0.11 O - Switch-M5eGiLPWR+ PN28058H 1.0.0.30 O Switch-M24HiPWR PN23249H/MN23249H 2.0.7.47 O - Switch-M24PWR PN232499 2.0.0.98 O - Switch-M24PWR PN23249K/MN23249K 2.0.0.90 O - Switch-M24PWR MN23249 2.0.7.23 O - Switch-M16PWR PN231699 2.0.0.98 O - Switch-M16PWR PN23169K 2.0.0.90 O - Switch-M12PWR PN231299 2.0.0.98 O - Switch-M12PWR PN23129K/MN23129K 2.0.0.90 O - Switch-M12PWR MN23129 2.0.7.23 O - Switch-M12ePWR PN271299 1.0.1.23 O - Switch-M8ePWR PN27089K 1.0.1.22 O - Switch-M8ePWR PN27089/MN27089 1.0.2.32 O - Switch-M8esPWR PN27089N 1.0.1.22 O - Switch-M5ePWR PN27059/MN27059 1.0.1.32 O - Switch-M24sG PN26240N 2.0.0.60 O - Switch-M24G PN26240/MN26240 2.0.1.48 O - Switch-M24X PN232409/MN232409 2.0.0.91 O - Switch-M24X MN23240K 2.0.7.33 O - Switch-M12X PN23120K/MN23120K 2.0.7.35 O - Switch-M48eG PN28480K 1.0.0.09 O - Switch-M48eG PN28480 1.0.0.149 O - Switch-M24eG PN28240K 1.0.0.25 O - Switch-M24eG PN28240 1.0.0.148 O - Switch-M16eG PN28160K 1.0.0.25 O - Switch-M16eG PN28160 1.0.0.148 O - Switch-M8eG PN28080K 1.0.0.25 O - Switch-M8eG PN28080 1.0.0.148 O - Switch-M12eX PN27120/MN27120 1.0.2.34 O - Switch-M5eX PN27050/MN27050 1.0.1.32 O - Switch-S24GPWR PN25249 1.0.0.11 O - Switch-S12PWR PN22129K 1.0.1.12 O - Switch-S9GPWR PN24099 0.0.0.35 O - Switch-S8GPWR+ PN24089 0.0.0.35 O - CiLIN-5PoE+PD PN250552N first release 0 - GA-MLV8TPoE+ ZLP260893V 3.0.0.10 O - XG-MLV8TPoE+ ZLP83089V 2.0.0.08 O - Part Name Part Number Known Compatible Version Easy Restore Function ---------------- ----------------- ------------------------ --------------------- ZEQUO 6700RE PN36243E - - ZEQUO 6600RE PN36241E - - ZEQUO 6500 PN36242E - - ZEQUO 6400 PN36240E - - ZEQUO 5410DL PN88162C - - ZEQUO 4600RE PN36241L - - ZEQUO 4500DL PN36241C - - ZEQUO 4400 PN36240L - - ZEQUO 2600RE PN26241E - - ZEQUO 2400 PN26240E - - ZEQUO 2310 PN26161K - - ZEQUO 2300 PN26241K - - ZEQUO 2210 PN26161 - - ZEQUO 2200 PN26241 - - MGA-ML4TWPoE++ PN290496 - - MXG-ML8THPoE++ ZLP290894 - - GA-ML4TWPoE++ PN260496 - - GA-MLD8TPoE+ PN260893D - - GA-MLD16TPoE+ PN261693D - - GA-ML48TCPoE+ PN264892 - - GA-ML24TPoE+ PN262493 - - GA-ML24TCPoE+ PN262492 - - GA-ML16TPoE+ PN261693 - - GA-ML16TCPoE+ PN261692 - - GA-ML12THPoE+ PN261294 - - GA-ML12TPoE+ PN261293 - - GA-ML8THPoE+ PN260894 - - GA-MLi8TPoE+ PN260893H - - GA-ML8TPoE+ PN260893 - - GA-ML8TCPoE+ PN260892 - - GA-ML4THPoE+ PN260494 - - GA-MLi4TPoE+ PN260493H - - GA-ML4TPoE+ PN260493N - - GA-MS24T PN26244 - - GA-MS16T PN26164 - - GA-MS12T PN26084 - - Switch-M24eGi PN28240i 2.0.1.07 O Switch-M16eGi PN28160i 2.0.1.07 O Switch-M8eGi PN28080i 2.0.1.07 O GA-AS24TPoE+ PN25248 - - GA-AS16TPoE+ PN25168 - - GA-AS12TPoE+ PN25128 - - GA-AS10TPoE+ PN25108 - - GA-ASW8TPoE+ PN25087 - - GA-ASW8TPoE+ PN25087K - - GA-AS4TPoE+ PN25048 - - GA-AS24T PN25241 - - GA-AS16T PN25161 - - GA-AS12T PN25121 - - GA-AS10T PN25101 - - GA-AS4T PN25041 - - GA-EMR48TPoE+ PN28489R 1.0.0.00 O XG-M24TPoE+ PN83249 1.0.0.01 O XG-M16TPoE+ PN83169 1.0.0.01 O XG-M12TPoE+ PN83129 1.0.0.01 O XG-M8TPoE+ PN83089 1.0.0.01 O SK-EML24TPoE+ PN28248S 1.0.0.24 O SK-EML16TPoE+ PN28168S 1.0.0.24 O SK-EML12TPoE+ PN28128S 1.0.0.24 O SK-EML8TPoE+ PN28088S 1.0.0.22 O FA-ML24TCPoE+ PN232492 - - FA-ML16TCPoE+ PN231692 - - FA-ML12TPoE+ PN231293 - - FA-ML8TPoE+ PN230893 - - FA-ML4TPoE+ PN230493N - - Switch-M12GL3 PN36120/MN36120 2.0.7.24 O (*2) Switch-M24L3X PN33240K/MN33240K 2.0.0.61 O (*2) Switch-M24DCPWR PN23249D 2.0.0.74 O Switch-M24GPWR+ PN26249K 2.0.0.61 O Switch-M24GPWR+ PN26249 2.0.0.52 O Switch-M16eGPWR+ PN28169 1.0.0.52 O Switch-M12eGPWR+ PN28129 1.0.0.54 O Switch-M8eGPWR+ PN28089K 1.0.0.54 O Switch-M8eGPWR+ PN28089 1.0.0.41 O Switch-M5eGPWR+ PN28059K 1.0.0.51 O Switch-M5eGPWR+ PN28059/MN28059 1.0.0.62 O Switch-M24eGLPWR+ PN28248 1.0.0.11 O Switch-M16eGLPWR+ PN28168 1.0.0.11 O Switch-M12eGLPWR+ PN28128 1.0.0.11 O Switch-M8eGLPWR+ PN28088 1.0.0.11 O Switch-M5eGLPWR+ PN28058 1.0.0.11 O Switch-M5eGiLPWR+ PN28058H 1.0.0.30 O Switch-M24HiPWR PN23249H/MN23249H 2.0.7.47 O Switch-M24PWR PN232499 2.0.0.98 O Switch-M24PWR PN23249K/MN23249K 2.0.0.90 O Switch-M24PWR MN23249 2.0.7.23 O Switch-M16PWR PN231699 2.0.0.98 O Switch-M16PWR PN23169K 2.0.0.90 O Switch-M12PWR PN231299 2.0.0.98 O Switch-M12PWR PN23129K/MN23129K 2.0.0.90 O Switch-M12PWR MN23129 2.0.7.23 O Switch-M12ePWR PN271299 1.0.1.23 O Switch-M8ePWR PN27089K 1.0.1.22 O Switch-M8ePWR PN27089/MN27089 1.0.2.32 O Switch-M8esPWR PN27089N 1.0.1.22 O Switch-M5ePWR PN27059/MN27059 1.0.1.32 O Switch-M24sG PN26240N 2.0.0.60 O Switch-M24G PN26240/MN26240 2.0.1.48 O Switch-M12G PN26120/MN26120 2.0.7.39 O (*2) Switch-M24X PN232409/MN232409 2.0.0.91 O Switch-M24X MN23240K 2.0.7.33 O Switch-M12X PN23120K/MN23120K 2.0.7.35 O Switch-M48eG PN28480K 1.0.0.09 O Switch-M48eG PN28480 1.0.0.149 O Switch-M24eG PN28240K 1.0.0.25 O Switch-M24eG PN28240 1.0.0.148 O Switch-M16eG PN28160K 1.0.0.25 O Switch-M16eG PN28160 1.0.0.148 O Switch-M8eG PN28080K 1.0.0.25 O Switch-M8eG PN28080 1.0.0.148 O Switch-M12eX PN27120/MN27120 1.0.2.34 O Switch-M5eX PN27050/MN27050 1.0.1.32 O Switch-S24GPWR PN25249 1.0.0.11 O Switch-S12PWR PN22129K 1.0.1.12 O Switch-S9GPWR PN24099 - - Switch-S8GPWR+ PN24089 - - CiLIN-5PoE+PD PN250552N - - GA-MLV8TPoE+ ZLP260893V 3.0.0.10 - XG-MLV8TPoE+ ZLP83089V 2.0.0.08 O Part Name Part Number Known Compatible Version Operational Monitor Function ---------------- ----------------- ------------------------ ---------------------------- ZEQUO 6700RE PN36243E 1.0.0.00 O ZEQUO 6600RE PN36241E 1.0.0.00 O ZEQUO 6500 PN36242E 1.0.1.29 O ZEQUO 6400 PN36240E 1.0.1.29 O ZEQUO 5410DL PN88162C 1.0.0.00 O ZEQUO 4600RE PN36241L 1.0.0.00 O ZEQUO 4500DL PN36241C 1.0.0.00 O ZEQUO 4400 PN36240L 1.0.0.38 O ZEQUO 2600RE PN26241E 1.0.0.00 O ZEQUO 2400 PN26240E 1.0.0.35 O ZEQUO 2310 PN26161K 1.0.0.00 O ZEQUO 2300 PN26241K 1.0.0.00 O ZEQUO 2210 PN26161 1.0.0.25 O ZEQUO 2200 PN26241 1.0.0.25 O MGA-ML4TWPoE++ PN290496 1.0.0.01 0 MXG-ML8THPoE++ ZLP290894 1.0.0.00 0 GA-ML4TWPoE++ PN260496 2.0.2.02 0 GA-MLD8TPoE+ PN260893D 2.0.1.06 0 GA-MLD16TPoE+ PN261693D 2.0.1.06 0 GA-ML48TCPoE+ PN264892 1.0.0.02 O GA-ML24TPoE+ PN262493 1.0.0.00 O GA-ML24TCPoE+ PN262492 1.0.0.00 O GA-ML16TPoE+ PN261693 1.0.0.02 O GA-ML16TCPoE+ PN261692 2.0.0.00 O GA-ML12THPoE+ PN261294 2.0.0.00 O GA-ML12TPoE+ PN261293 2.0.0.00 O GA-ML8THPoE+ PN260894 2.0.0.00 O GA-MLi8TPoE+ PN260893H 2.0.0.00 O GA-ML8TPoE+ PN260893 1.0.0.00 O GA-ML8TCPoE+ PN260892 1.0.0.00 O GA-ML4THPoE+ PN260494 2.0.0.00 O GA-MLi4TPoE+ PN260493H 2.0.0.00 O GA-ML4TPoE+ PN260493N 1.0.0.00 O GA-MS24T PN26244 1.0.0.00 O GA-MS16T PN26164 1.0.0.00 O GA-MS12T PN26084 1.0.0.00 O Switch-M24eGi PN28240i 2.0.1.07 O Switch-M16eGi PN28160i 2.0.1.07 O Switch-M8eGi PN28080i 2.0.1.07 O GA-AS24TPoE+ PN25248 1.0.0.00 O(*3) GA-AS16TPoE+ PN25168 1.0.0.00 O(*3) GA-AS12TPoE+ PN25128 1.0.0.00 O(*3) GA-AS10TPoE+ PN25108 1.0.0.00 O(*3) GA-ASW8TPoE+ PN25087 1.0.0.00 O(*3) GA-ASW8TPoE+ PN25087K 1.0.0.00 0(*3) GA-AS4TPoE+ PN25048 1.0.0.00 O(*3) GA-AS24T PN25241 1.0.0.00 O(*3) GA-AS16T PN25161 1.0.0.00 O(*3) GA-AS12T PN25121 1.0.0.00 O(*3) GA-AS10T PN25101 1.0.0.00 O(*3) GA-AS4T PN25041 1.0.0.00 O(*3) GA-EMR48TPoE+ PN28489R 1.0.0.00 O XG-M24TPoE+ PN83249 1.0.0.01 O XG-M16TPoE+ PN83169 1.0.0.01 O XG-M12TPoE+ PN83129 1.0.0.01 O XG-M8TPoE+ PN83089 1.0.0.01 O SK-EML24TPoE+ PN28248S 1.0.0.24 O SK-EML16TPoE+ PN28168S 1.0.0.24 O SK-EML12TPoE+ PN28128S 1.0.0.24 O SK-EML8TPoE+ PN28088S 1.0.0.22 O FA-ML24TCPoE+ PN232492 2.0.1.00 O (*4) FA-ML16TCPoE+ PN231692 2.0.1.00 O (*4) FA-ML12TPoE+ PN231293 2.0.1.00 O (*4) FA-ML8TPoE+ PN230893 1.0.0.01 O (*4) FA-ML4TPoE+ PN230493N 1.0.0.01 O (*4) Switch-M24L3X PN33240K/MN33240K 2.0.0.61 O Switch-M24DCPWR PN23249D 2.0.0.74 O Switch-M24GPWR+ PN26249K 2.0.0.61 O Switch-M24GPWR+ PN26249 2.0.0.52 O Switch-M16eGPWR+ PN28169 1.0.0.52 O Switch-M12eGPWR+ PN28129 1.0.0.54 O Switch-M8eGPWR+ PN28089K 1.0.0.54 O Switch-M8eGPWR+ PN28089 1.0.0.41 O Switch-M5eGPWR+ PN28059K 1.0.0.51 O Switch-M5eGPWR+ PN28059/MN28059 1.0.0.62 O Switch-M24eGLPWR+ PN28248 1.0.0.11 O Switch-M16eGLPWR+ PN28168 1.0.0.11 O Switch-M12eGLPWR+ PN28128 1.0.0.11 O Switch-M8eGLPWR+ PN28088 1.0.0.11 O Switch-M5eGLPWR+ PN28058 1.0.0.11 O Switch-M5eGiLPWR+ PN28058H 1.0.0.30 O Switch-M24PWR PN232499 2.0.0.98 O Switch-M24PWR PN23249K/MN23249K 2.0.0.90 O Switch-M16PWR PN231699 2.0.0.98 O Switch-M16PWR PN23169K 2.0.0.90 O Switch-M12PWR PN231299 2.0.0.98 O Switch-M12PWR PN23129K/MN23129K 2.0.0.90 O Switch-M12ePWR PN271299 1.0.1.23 O Switch-M8ePWR PN27089K 1.0.1.22 O Switch-M8esPWR PN27089N 1.0.1.22 O Switch-M5ePWR PN27059/MN27059 1.0.1.32 O (*3) Switch-M24sG PN26240N 2.0.0.60 O Switch-M24X PN232409/MN232409 2.0.0.91 O Switch-M12X PN23120K/MN23120K 2.0.7.35 O Switch-M48eG PN28480K 1.0.0.09 O Switch-M48eG PN28480 1.0.0.149 O Switch-M24eG PN28240K 1.0.0.25 O Switch-M24eG PN28240 1.0.0.148 O Switch-M16eG PN28160K 1.0.0.25 O Switch-M16eG PN28160 1.0.0.148 O Switch-M8eG PN28080K 1.0.0.25 O Switch-M8eG PN28080 1.0.0.148 O Switch-M12eX PN27120/MN27120 1.0.2.34 O (*3) Switch-M5eX PN27050/MN27050 1.0.1.32 O (*3) Switch-S24GPWR PN25249 1.0.0.11 O Switch-S12PWR PN22129K 1.0.1.12 O Switch-S9GPWR PN24099 0.0.0.35 O (*3) Switch-S8GPWR+ PN24089 0.0.0.35 O (*3) CiLIN-5PoE+PD PN250552N first release 0 GA-MLV8TPoE+ ZLP260893V 3.0.0.10 O XG-MLV8TPoE+ ZLP83089V 2.0.0.08 O *1 Check the supported part name and part number, and use this application in the known compatible firmware version or later. product of selling is different by the country or region, please check at our website( https://panasonic.co.jp/ew/pewnw/english/ ). *2 These do not support the switch search function. *3 These support the periodical Ping monitor function only. the operational monitor function is not available only with this product. *4 These do not support the Auto setting restoration. ==================================== 5. Installation and Uninstallation ==================================== No installer is provided for this application. Extract the archive file in any folder (such as on the desktop). To upgrade this application, overwrite the existing folder with a new file. To uninstall this application, remove the extracted folders and files. (This application does not use a registry.) The following four administration files are newly created in the same folder. Remove them when they are not required. (If you need authentication information, store them without removing them.) * After ZEQUO assist Plus initial start-up information is registered: auth.db - Login information about an acquired switch user.dat - Authentication information about this application * After the operational monitor function is configured: NetworkManagerEquipList.xml - Device information about the operational monitor function NetworkManagerSettings.xml - Configuration information about the operational monitor function ===================== 6. Revision History ===================== 2023/10/23 Version 1.6.0.0 - Changed specifications 1. Following products have been added as supported models. Setting support function/Operations support function: MXG-ML8THPoE++(ZLP290894) 2.The browser used for web connection to the switch has been changed from Internet Explorer 11 to Microsoft Edge. 2023/04/21 Version 1.5.0.0 - Changed specifications 1. Following products have been added as supported models. Setting support function/Operations support function: GA-MLV8TPoE+(ZLP260893V) XG-MLV8TPoE+(ZLP83089V) 2022/09/14 Version 1.4.0.2 - Resolved Issues: 1. Fixed a issue that user credentials were sometimes not saved *If this issue has already occurred, it will not be improved by updating, so please delete the "auth.db" and "user.dat" files in the package, start this application, and register the user information again. 2022/04/01 Version 1.4.0.1 - Changed specifications 1. Change company name to Panasonic Electric Works Networks Co., Ltd. 2021/02/25 Version 1.4.0.0 - Changed specifications 1. Following products have been added as supported models. Setting support function/Operations support function: CiLIN-5PoE+PD(PN250552N) 2020/12/23 Version 1.3.0.0 - Changed specifications 1. Following products have been added as supported models. Setting support function/Operations support function: MGA-ML4TWPoE++(PN290496), GA-ML4TWPoE++(PN260496) GA-MLD8TPoE+(PN260893D), GA-MLD16TPoE+(PN261693D) GA-ASW8TPoE+(PN25087K) 2. New vendor code MAC addresses (BC-69-CB) are now supported. - Resolved Issues: 1. Fixed an issue that an incorrect initial value is displayed in the untagged port field of the VLAN / IP Address Setting Screen when ZEQUO 2210 is selected in the ZEQUO initial setting. 2. Fixed an issue that setting restoration function using the Operations Support Function could not be executed in an environment where many switching hubs are connected. 3. Fixed an issue that collective upgrade for GA-ML series may not be executed in the Operations Support Function. 4. Fixed an issue that log acquisition for ZEQUO 2200 is not executed in the environment where multiple FDB information of VLAN is registered. 5. Fixed an issue that logs can only be acquired halfway when link aggregation is set for GA-ML series and Switch-M48eG. 6. Fixed an issue that the switching hub could not be searched by the IP address easy setting of the setting support function when the Panasonic network disk recorder (DG-NV200, WJ-NX200) was connected. 2019/09/27 Version 1.2.9.2 - Resolved Issues: 1. Fixed an issue that operation monitoring is not possible for GA-ML24TCPoE+. 2. Fixed an issue that an error message is output to the acquired log when performing log acquisition for GA-ML series with the Batch log acquisition function of Operational monitor function. 2019/07/22 Version 1.2.9.1 - Resolved Issues: 1. Fixed an issue that Panasonic wireless AP WINDIO(EA-7HW02AP1) could not be searched by the IP address easy setting of the setting support function. 2. Fixed an issue that when you execute a command that requires some page feed in the command execution function of the Operational monitor function, the page feed is not made and an error occurs. 3. Fixed an issue that time out and setting can not be obtained when getting setting of ZEQUO series with ZEQUO initial setting of setting support function. 4. Fixed the mistake of note on the IP address easy setting screen. 2019/05/17 Version 1.2.9.0 - Resolved Issues: 1. In the operational Monitor function, fixed an issue that Collective upgrade for GA-ML series does not work properly. 2019/05/10 Version 1.2.8.0 - Changed specifications 1. Following products have been added as supported models. Setting support function/Operational monitor function: GA-ML48TCPoE+(PN264892), GA-ML24TPoE+(PN262493), GA-ML24TCPoE+(PN262492), GA-ML16TPoE+(PN261693), GA-ML16TCPoE+(PN261692), GA-ML12THPoE+(PN261294), GA-ML12TPoE+(PN261293), GA-ML8THPoE+(PN260894), GA-MLi8TPoE+(PN260893H), GA-ML8TPoE+(PN260893), GA-ML8TCPoE+(PN260892), GA-ML4THPoE+(PN260494), GA-MLi4TPoE+(PN260493H), GA-ML4TPoE+(PN260493N) FA-ML24TCPoE+(PN232492), FA-ML16TCPoE+(PN231692), FA-ML12TPoE+(PN231293), FA-ML8TPoE+(PN230893), FA-ML4TPoE+(PN230493N) - Resolved Issues: 1. Fix an issue that the update notification function does not work. 2019/04/01 Version 1.2.7.1 - Changed specifications 1. Change company name to Panasonic Life Solutions Networks Co., Ltd. 2019/01/08 Version 1.2.7.0 - Changed specifications 1. Following products have been added as supported models. Setting support function/Operational monitor function: ZEQUO 2310(PN26161K), ZEQUO 2300(PN26241K) 2. Change the maximum length of the device password and enable password in the operation support function from 15 characters to 64 characters. - Resolved Issues: 1. Fixed an issue where there was a case that control could not be performed on the GA - MS series whose prompt was changed with the operations support function. 2. Fixed an issue that failed to execute reboot command on ZEQUO RE series and GA-MS series by executing command of operations support function. 3. Fixed an issue that sometimes it is not possible to set to specified equipment when sorting by IP easy setting of setting support function. 4. Fixed a problem that ZEQUO assist Plus could not control to equipment of ZEQUO RE series / GA-MS series which set AAA by operations support function. 5. Fixed typo of string. 2018/07/31 Version 1.2.6.1 - Resolved Issues: 1. Can not execute the some commands to ZEQUO RE/GA-MS series from operations support function. 2. Can not control to ZEQUO RE/ZEQUO DL/GA-MS series with none default prompt from operations support function. 3. Can not get config of Switch-M8/16/24eGi from setting support function. 4. Fail update notification. 2018/05/30 Version 1.2.6.0 - Changed specifications 1. Following products have been added as supported models. Setting support function/Operational monitor function: Switch-M5eGiL(PN28058H) 2018/02/28 Version 1.2.5.0 - Changed specifications 1. Following products have been added as supported models. Setting support function/Operational monitor function: Switch-M8eGi(PN28080i), Switch-M16eGi(PN28160i), Switch-M24eGi(PN28240i) - Resolved Issues: 1. There is the case that can not recover timeout when network is reconnect after application startup at Periodical Ping Monitor Setting. 2. Application notify new firmware notification again after latest versionup. 2017/12/26 Version 1.2.4.0 - Changed specifications 1. Following products have been added as supported models. Setting support function/Operational monitor function: ZEQUO 5410DL(PN88162C), SK-EML12TPoE+(PN28128S), SK-EML16TPoE+(PN28168S), SK-EML24TPoE+(PN28248S) 2017/10/25 Version 1.2.3.0 - Changed specifications 1. Following products have been added as supported models from v1.2.2.0. Setting support function/Operational monitor function: ZEQUO 6700RE(PN36243E), ZEQUO 6600RE(PN36241E), ZEQUO 4600RE(PN36241L), ZEQUO 2600RE(PN26241E), GA-MS24T(PN26244), GA-MS16T(PN26164), GA-MS12T(PN26084) 2017/09/11 Version 1.2.2.0 - Changed specifications 1. Following products have been added as supported models from v1.2.1.1. Operational monitor function: ZEQUO 4500DL(PN36241C) 2017/05/31 Version 1.2.1.1 - Changed specifications 1. Following products have been added as supported models from v1.2.1.0. Setting support function/Operational monitor function: SK-EML8TPoE+(PN28088S) - Resolved Issues: 1. When searching result of IP address easy setting function have multiple WINDIO(EA-7HW02AP1), CSV output is not correct outputted. 2. When multibyte characters are included in settings of switching hub, the getting settings by easy restore function are not correctly gotten for character corruption. 3. When the config of eG series(PN28080K/PN28160K/PN28240K/PN28480K) have "internet mansion" command, restoring don't complete by easy restore function. 4. When multibyte characters are included in settings of switching hub, the getting logs by operational monitor function are not correctly gotten for character corruption. 5. Batch log acquisition can not execute without schedule setting of log acquisition. 6. There is not batch command execution and batch setting acquisition in menu of operational monitor function. 2017/03/31 Version 1.2.1.0 - Changed specifications 1. IP address easy setting function: Hostname is added to CSV output. - Known bugs: 1. When multibyte characters are included in settings of switching hub, the getting settings by easy restore function are not correctly gotten for character corruption. 2. When multibyte characters are included in settings of switching hub, the getting logs by operational monitor function are not correctly gotten for character corruption. 2016/12/27 Version 1.2.0.0 - Changed specifications 1. Following products have been added as supported models. Setting support function/Operational monitor function: GA-EMR48TPoE+(PN28489R) IP address easy setting function: Panasonic wireless AP WINDIO(EA-7HW02AP1) *It will be supported by firmware update Following products have been added as supported models from v1.1.1.0 GA-AS24TPoE+(PN25248), GA-AS16TPoE+(PN25168), GA-ASW8TPoE+(PN25087), GA-AS24T(PN25241), GA-AS16T(PN25161), GA-AS12T(PN25121), GA-AS10T(PN25101), GA-AS4T(PN25041 2. IP address easy setting function: Support CSV output. - Resolved Issues: 1. Cannot get the configuration file via "Collective Setting Acquisition" function at the following products, which has the IP address exceeding 13 characters: Switch-M8esPWR(PN27089N), Switch-M8ePWR(PN27089K), Switch-M12PWR(PN23129K), Switch-M16PWR(PN23169K), Switch-M24PWR(PN23249K) 2. Cannot get all displayed result logs via "Batch Command Execution" and "Command Transmission" functions when execute the following command: "copy tftp running-config" 3. When IP of restoring is different IP of config, IP restoring is success but error is output. 4. Cannot search PN22129K(Switch-S12PWR). 2016/9/1 Version 1.1.1.0 - Changed specifications 1. IP address easy setting function: following products have been added as supported models. GA-AS12TPoE+(PN25128), GA-AS10TPoE+(PN25108), GA-AS4TPoE+(PN25048) - Resolved Issues: 1. Fixed the mistake of word in the Login form. - Known bugs: 1. Cannot get the configuration file via "Collective Setting Acquisition" function at the following products, which has the IP address exceeding 13 characters: Switch-M8esPWR(PN27089N), Switch-M8ePWR(PN27089K), Switch-M12PWR(PN23129K), Switch-M16PWR(PN23169K), Switch-M24PWR(PN23249K) 2. Cannot get all displayed result logs via "Batch Command Execution" and "Command Transmission" functions when execute the following command: "copy tftp running-config" 2016/5/20 Version 1.1.0.0 - Resolved Issues: 1. Cannot get the information about "Updating device information" at following products: Switch-M12PWR(PN231299), Switch-M16PWR(PN231699), Switch-M24PWR(PN232499) 2. Cannot get all logs from the "Log Acquisition" function at the following products: ZEQUO 2400(PN26240E), ZEQUO 2210(PN26161) 3. The Command 2 in Alert Profile setting is executed even if the command is not input. - Add Function: 1. Add the TX command execute times option in the Alart Profile setting. 2015/12/21 Version 1.0.0.0 First release ============================= 7. Disclaimers and Cautions ============================= - We assume no responsibility for any damage on you or third parties even if the use of this application causes failure or a defect on your equipment or system. - The specifications of this application are subject to change without notice. - Duplicating, changing, and transferring this application without permission are prohibited. - Remodeling this application is prohibited for use. - All or part of these disclaimers and cautions are subject to modify or change without notice. - Reprinting all or part of this document without permission is prohibited. - Company names and product names described in this document are trademarks or registered trademarks of the respective companies. Panasonic Electric Works Networks Co., Ltd. https://panasonic.co.jp/ew/pewnw/english/ Copyright (c) Panasonic Electric Works Networks Co., Ltd. 2015-2023