ZEQUO series 10G+ALL GIGA Stackable L3/ALL GIGA L2

Summary

ZEQUO Series Switch is managed ethernet Ethernet Switch,and has SD Card Slot Standard Equipment.
ZEQUO 6400 and 6500 are 10G-applicable High-end L3 Core Stackable Ethernet Switch.
ZEQUO 2310 and 2300 are L2 Core Ethernet Switch.

Features

(1)Physical ports

(2) SD Card boot
ZEQUO will boot by using the configuration file rather than the configuration file in the device.*Fine name in SD card must be changed to the name for boot in advance.

(3)Optic Port Diagnosis
You can immediately check the status of SFP Module ｆrom the distance by using network without any special device for instance optical power meter. You also can immediately check easy diagnostic from the REMOTE.

(4)Setting Restoration by SD Card
Prompt recovery is possible without any knowledge of PC and ZEQUO Series.
�@ Trouble occurs with the device.
�A Pull out SD Card from the device in trouble.
�B Disconnect the device in trouble from the network.
�C Insert SD Card into the substitute device.
(Having set the substitute device in the original position, start it with the 　configuration in SD card powered on.

(5) Standard Equipment of SD Card slots
●Setting, Backup for Firmware (Equipment main body → SD)
●Setting, Multiple saving of Firmware, Switching of Startup file (SD←→Equipment main body)
●SD Card Boot(Applicable for both Setting and Firmware)

(6) Standard Equipment of slots (4 ports) for SFP + Expansion (Stack as well)
Only ZEQUO 6500 and ZEQUO 6400
ZEQUO 6500 and ZEQUO 6400 can stack.
●Direct insert of SFP + Module or Stack Cable is possible.
As you don’t need to purchase the slots for SFP + Expansion and Stack separately, a flexible network configuration could be possible at a low cost.
●2 slots work for stack as well.