ページの先頭です。
Panasonic Electric Works Networks Co., Ltd. > Products > Product List > Switch-M8esPWR （PN27089NA）
ここから本文です。
Switch-M8esPWR （PN27089NA）
PoE compliant switch (power supply supporting HUB) 8-port
ower supply function, 10/100 Mbps 8-port + 10/100/1000 Mbps 2-port
Ethernet Switch (L2 switch)
country available for sale: indonesia
Product
Product number of the end □ is country that corresponds to is displayed
□＝A：Indonesia／-ID：Indonesia／-TH：Thailand／-MY：Malaysia／-SG：Singapore
| External dimensions |
|---|
| H44×W210×D280mm |
Summary
Switch-M8esPWR is managed ethernet Ethernet Switch with Power Over Etherent function.
Switch-M8esPWR has 8 10/100BASE-TX ports which have the IEEE 802.3af-compliant feeding power function.
Switch-M8esPWR also has 2 uplink ports which have the 10/100/1000BASE-T ports.
Features
(1)Port 1-8 These are 10/100BASE-TX ports which support auto negotiation.
Or the speed and the communicate mode can be set by manual setting.
Port 9-10
These ports are 10/100/1000BASE-T ports which support auto negotiation.
(2)As for port 1-8, feeding power in accordance with IEEE 802.3af is possible.
The feeding power is 15.4W or less per port.
And it is possible to feed power up to 60W in the entire equipment.
(3)Straight/cross cable automatic operation discrimination function is installed in all twisted pair ports.
Users can use straight cable regardless to consider the distinction between the terminal and
the networking equipment.
(This function can not be used when port trunking is set.
By default, port 1-8 are set to the MDI-X setting at the factory shipment. )
(4)Users can connect from remote console using Telnet or SSH,and can check and change the setting of
Ethernet Switch. Users can set PoE enabled/disabled from remote console for each port (port 1-8).
(5)By detecting the connection status, power saving mode works, and automatically stop the power
supply to the port which is not connected by any device.
(6)Up to 256 VLAN group can be set by grouping ports using the VLAN function.
(7)The spanning tree protocol is supported and the system construction with redundancy is possible.
(8)The QoS function in accordance with IEEE802.1p is supported.
(9)Switch-M8esPWR supports IEEE802.1X user authentication function (EAP-MD5/TLS/PEAP).
ここからサブメニューです。
Panasonic Electric Works Networks Co., Ltd. > Products > Product List > Switch-M8esPWR （PN27089NA）
