ページの先頭です。
Panasonic Electric Works Networks Co., Ltd. > Products > Product List > Switch-M16PWR （PN23169A）
ここから本文です。
Switch-M16PWR （PN23169A）
PoE compliant switch (power supply supporting HUB) 16-port
Power supply function, 10/100 Mbps 16-port + 10/100/1000 Mbps 2-port +
SFP2 slot (10/100/1000T and exclusive use) Ethernet Switch (L2 switch)
country available for sale: indonesia
Product
Product number of the end □ is country that corresponds to is displayed
□＝A：Indonesia／-ID：Indonesia／-TH：Thailand／-MY：Malaysia／-SG：Singapore
| External dimensions |
|---|
| H44×W330×D230mm |
Summary
The Switch-M16PWR is managed Layer2 Ethernet Ethernet Switch with Power Over Etherent function.
The Switch-M16PWR has 16 10/100BASE-TX ports which have the IEEE 802.3af-compliant feeding power function.(PoE) The Switch-M16PWR also has 2 uplink ports which have 2 extension SFP slots with 2 10/100/1000BASE-T ports.
Features
(1) The Switch-M16PWR has Menu/CLI/Web interface for setting parameters.
(2) 1-16 ports These are 10/100BASE-TX ports which support auto negotiation. Or the speed and the communicate mode can be set by manual setting.
(3) 15-16 ports These ports are 10/100/1000BASE-T ports and extension SFP slots which support auto negotiation. These ports are combo ports. Users can choose to use SFP module or 10/100/1000BASE-T ports.
(4) As for 1-16 ports, feeding power in accordance with IEEE 802.3af is possible. The feeding power is 15.4W or less per port. And it is possible to feed power up to 170W in the entire equipment.
(5) Straight/cross cable automatic operation discrimination function is installed in all twisted pair ports.
Users can use straight cable regardless to consider the distinction between the terminal and the networking equipment.
(This function can no be used when port trunking is set. By default, port 1-16 are set to the MDI-X setting at the factory shipment.)
(6) Users can connect from remote console using Telnet or Browser, and can check and change the setting of Ethernet Switch. Users can set PoE enabled/disabled from remote console for each port (port 1-16).
(7) By detecting the connection status, power saving mode automatically works, and control and eliminate tominimum the electricity consumption to the requirement.
(8) Max 256 VLAN group can be set by grouping ports using the VLAN function.
(9) The spanning tree protocol is supported and the system construction with redundancy is possible.
(10) The QoS function in accordance with IEEE802.1p is supported.
(11) BPDU function is able to shutdown port when received BPDU packet.
This will make you avoid from unexpected network loop.
(12) User authentication function (EAP-MD5/TLS/PEAP) in accordance with IEEE802.1x is supported.
ここからサブメニューです。
Panasonic Electric Works Networks Co., Ltd. > Products > Product List > Switch-M16PWR （PN23169A）
