L series -ALL Gigabit PoE Plus

Summary

L series is managed ethernet Ethernet Switch with Power Over Etherent function.
L series has the IEEE 802.3at-compliant feeding power function.
L series also has 2 uplink ports which have 2 extension SFP slots.

Features

(1)Physical ports

(2) The feeding power is 30W or less per port.(IEEE802.3at)

(3)Straight/cross cable automatic operation discrimination function is installed in all twisted pair ports.
Users can use straight cable regardless to consider the distinction between the terminal and the networking equipment.
(This function can not be used when port trunking is set.By default, port 1-8 are set to the MDI-X setting at the factory shipment. )
(4)Users can connect from remote console using Telnet or SSH,and can check and change the setting of Ethernet Switch. Users can set PoE enabled/disabled from remote console for each port.
(5)By detecting the connection status, power saving mode works, and automatically stop the power supply to the port which is not connected by any device.
(6)Up to 256 VLAN group can be set by grouping ports using the VLAN function.
(7)The spanning tree protocol is supported and the system construction with redundancy is possible.
(8)The QoS function in accordance with IEEE802.1p is supported.
(9)L series supports IEEE802.1X user authentication function (EAP-MD5/TLS/PEAP).