ページの先頭です。
ここから本文です。
PoE compliant switch(L2 switch) with 10/100/1000 Mbps and SFP slot optimal for Dante audio system
A Dante compatible PoE switch turns sound systems into digital networks
IEEE802.3at(30W)
IEEE802.3af(15.4W)
Dante is a digital audio network standard developed by the Australian company Audinate. Compliant with both IP and Gigabit networks, it uses network switches and Ethernet cables to send and receive uncompressed digital audio signals across multiple channels with low latency (delay).
LAN cables merge multiple channels into one network
Helps reduce overall costs
Replaces multicore cables with LAN cables
Simplifies wiring
Simple and easy to install with no more heavy cables
Equipment can be wired with lightweight and easy-to-use LAN cables instead of heavy analog cables. One person can wire everything, reducing installation time.
Quick installation in hotel conference rooms, commercial facilities, school lecture halls, etc.
10/100/1000Mbps support for all UTP ports
Expansion ports use SFP to send and receive signals over long distances via fiber-optic cables
(they use SFP and 10/100/1000T exclusively)
10/100/1000T (PoE power supply) | 16 Ports |
10/100/1000T | 4 ports *Exclusively used with SFP |
SFP | 4 ports *Exclusively used with 10/100/1000T |
Commercially available (RJ45 ? etherCON) adapter cables can be used even if etherCON connectors are used at the site.
By detecting the freeze of the PoE connected device and turning the power supply OFF / ON, the connected device is rebooted (restarted) and recovered from the freeze. * Settings can be made only with the switching hub itself.
・Strengthens the resistance to lightning surges on the UTP port side, making it less susceptible to lightning surges when supplying power to the outdoors. ・In addition to lightning surge resistance, it has excellent environmental resistance because it supports an operating environment of 50 ° C. * GA-MLi8TPoE + and GA-MLi4TPoE + support 60 ℃
・It is possible to suppress the speed of the fan rotation speed according to the power supply capacity. Can be used in office rooms such as desksides and in quiet environments such as corridors.
Product number of the end □ is country that corresponds to is displayed
□=A:Indonesia/-ID:Indonesia/-TH:Thailand/-MY:Malaysia/-SG:Singapore/-NZ:New Zealand
Product | External dimensions | Detailed information (PDF) |
---|---|---|
GA-MLD16TPoE+ (PN261693D-□) |
H44× W330× D230mm |
■(PN261693D-□) Dataseet / Installation Guide Manual Menu / CLI ■New Zealand(PN261693D-NZ) Specification / Drawing |
Model Name | Model No. | Status |
---|---|---|
GA-MLD16TPoE+ | PN261693D-NZ | Now on sale |
(1)Physical ports
Product | 10/100/1000T Port | SFP slots |
---|---|---|
GA-MLD16TPoE+ (PN261693D-□) |
20 | 4 |
(2) The feeding power is 30W or less per port.(IEEE802.3at)
Product | PoE port | PoE power budget |
---|---|---|
GA-MLD16TPoE+ (PN261693D-□) |
16 (1-16) | 250W |
(3)Straight/cross cable automatic operation discrimination function is installed in all twisted pair ports.
Users can use straight cable regardless to consider the distinction between the terminal and the networking equipment.
(This function can not be used when port trunking is set. By default, port are set to the MDI-X setting at the factory shipment. )
(4)Users can connect from remote console using Telnet or SSH,and can check and change the setting of Ethernet Switch. Users can set PoE enabled/disabled from remote console for each port.
(5)By detecting the connection status, power saving mode works, and automatically stop the power supply to the port which is not connected by any device.
(6)Up to 4096VLAN group can be set by grouping ports using the VLAN function.
(7)The spanning tree protocol is supported and the system construction with redundancy is possible.