ZEQUO 2210(PN26161) Release Note

January 25, 2018 Version 1.0.0.30
- Specification Changes:
1. Changed SNMP trap to be transmitted when linkdown/up occurred on one port for link aggregation group.

- Resolved Issues:
1. Communication failure issue: when execute PING from the PC which IP address of 4th octet is 127, it does not reply PING.
2. MSTP does not operate if you do not specify a region name.


August 1, 2017: Version 1.0.0.29
- Specification Changes:
1. Changed the default value of power saving to disabled from enabled.

- Resolved Issues:
1. SNTP issue: The sent UDP source port number of the NTP packet is not 123.
2. DDM issue: Can not set the value correctly that DDM high or low threshold is auto mode.


March 11, 2016: Version 1.0.0.26
- Resolved Issues:
1. Multicast forwarding issue: when Link aggregation is configured, it does not forward some multicast packets.


December 1, 2015: Version 1.0.0.25
- Resolved Issues:
1. Multicast packet loss issue: when the IGMP group members are updated, the packet loss is occurred at the existing members.
2. SD card issue: when the SD card is formatted with FAT16, a file which has long file name is broken via overwriting.
3. DDM issue: Display the wrong DDM values.
4. RRP issue: when the RRP topology failure is recovered, the ARP table is not flushed.
5. CLI command issue: the command of SNTP secondary server IP address is outputted with primary's IP address.
6. Console issue: when the console port is connected with the network interface using UTP cable, the console response halts after boot-up.
7. CLI command issue: "show config modified" outputs a wrong WAC command.


January 30, 2015: Version 1.0.0.20
First release.