ページの先頭です。
Panasonic Electric Works Networks Co., Ltd. > Support
> FAQs > List of All Questions
ここから本文です。
List of All Questions
List of All Questions
- What is the maximum power feeding capacity of the PoE switch?
- Is there any problem with equipment that does not support PoE being connected to PoE switches?
- Can the PoE switch at factory shipment status supply power to a connected PoE compliant device?
- Is there a setting whereby power is not supplied?
- Are there any restrictions on cables used when connecting PoE terminals (IP telephone, wireless AP, etc.)?
- Can PoE switches be connected with each other by cascade connection? Also, will doing so cause any problems for operation?
- Which pin of the UTP cable does PoE function use to supply power?
- Can the power feeding function be turned on/off remotely?
- Can spanning tree be used in combination with the Internet Mansion function?
- Can link aggregation be used in combination with the Internet Mansion function?
- How many uplink ports can be created if the Internet Mansion function is enabled?
- Is a mail server required within the network in order to make the e-mail notification function available? Or, does the product have a mail server function?
- Which switches are equipped with the Telnet server function?
- Can IP address be restricted when accessed by Telnet?
- Are login name and password reflected in the Config information?
- The 802.1x function is provided by port based authentication and MAC based authentication. How is operation effected by type of authentication?
- Is port based authentication used for the dynamic VLAN function and guest VLAN function?
- Does the traffic graph of the Web Management function show the value for packets received by the port, or packets sent by the port?
- Is communication control using MAC address by switch possible?
- What sort of security is used when accessing switches?
- What sort of security is used when accessing switches?
- What is the power consumption of the Ethernet Switch? How much heat does the Ethernet Switch generate?
- Can ports with extension module slots such as Switch-M24PWR (e.g. Switch-M24PWR ports No. 25 and 26) be connected to SFP (GBIC) and UTP by cable and used simultaneously?
- Can the switch be mounted on the wall?
- Can the switch be mounted on the wall?
- Is RoHS Directive complied?
- Is RoHS Directive complied?
- How can the manufacturer's serial number of the product be checked?
- How can the manufacturer's serial number of the product be checked?
- How can the switch be accessed?
- How can the switch be accessed?
- After setting modification, does it have to be rebooted to make settings effective?
- After setting modification, does it have to be rebooted to make settings effective?
- Does the product have a command to save settings after modification?
- Which models are equipped with SNMP function?
- How can I know the type and status of self diagnosis LED (STATUS) lamp?
- How can I know the type and status of self diagnosis LED (STATUS) lamp?
- The product code has been changed from MN to PN. Does it mean there is a change in performance, functions, or anything?
- Can I access other switches from the logged in switch by Telnet?
- Can I access other switches from the logged in switch by Telnet?
- I connected the twisted pair port of MC1000SX to a 100M device but it does not link up.
- There are a SFP expansion slot port and a twisted pair port which have the same port number. Can both of them be used together?
- There are a SFP expansion slot port and a twisted pair port which have the same port number. Can both of them be used together?
- When Ethernet Switches are connected through a UTP cable, some ports can link up but others cannot. Why does such a difference exist?
- Is the reboot timer function automatically started after version upgrade?
- Can the reboot timer be used also for usual reboot?
- Is there a possibility of failure if the positive terminal and the negative terminal of the power source cable of Switch-M24DCPWR are connected in reverse?
- Can the time be set manually?
- Can the time be set manually?
- I want to change the fan speed. How many degrees are available for changing the fan speed?
- Is there a recommended threshold value for storm control?
- Can the port be shut down if the threshold value of storm control is exceeded?
- What is the difference between "Loop prevention function" and "Loop detection and shutdown function"?
- I want to get config by running the show run command but long logs cause pagers. Is there any way to get long logs without pagers?
- I want to change my password. How many characters can be specified at the maximum for it?
- The cost value of spanning tree can be found in config. Is it included by factory default?
- What is the maximum value that can be displayed for the statistical information counter?
- I want to know specifications of optical fiber cables which can be used for SFP modules and media converters.
- Are magnets shipped with the Ethernet Switch?
- Are magnets shipped with the Ethernet Switch?
- I forgot the login password and can't login to a switch. How do I login?
- How do I restore the settings to the status at factory shipment?
- How do I restore the settings to the status at factory shipment?
- What tool is required to loosen the screws of the sliding door for the DIP switch of tap-type Ethernet Switches?
- Is there any way to know the manufacturer's serial number of the switch on the console screen?
- Is there any way to know the manufacturer's serial number of the switch on the console screen?
- The product has been damaged by lightning.
- The product has been damaged by lightning.
- I need the factory-default config data of the switch.
- How can I check the MAC address of my switch?
- Does the product have the Telnet server function?
- What is the power consumption of the Ethernet Switch?
- Does the product support jumbo frames?
- Is there any recommended value for the threshold which is set by the config traffic control command?
- Can the port be shut down if the traffic exceeds the threshold value?
- How much switching capacity does the product have?
- How much switching capacity does the product have?
- What OSs are supported?
- How many terminals can be registered with the device list pane?
- Until when the special release version of ZEQUO assist Plus can be started up?
- How many alert profiles can be created?
- What is the minimum value (sec.) that can be specified as the ping interval for the ping monitoring function?
- How can I report ping errors to administrators of relevant terminals via e-mail when they are detected by the periodic ping monitoring function?
- How can errors be notified to the administrator?
- Can text which is notified by alert profiles be changed?
- Where are logs stored?
- How the previous CSV file is processed when a new one is imported?
- Where should I save the version upgrade files which are configured on terminal basis for batch firmware version upgrade?
- Can the Syslog server function be used to notify the administrator of receiving a specific message?
- How many schedule items can be specified for scheduled command transmission?
- How many e-mail addresses can be registered for a single alert profile?
- Is it necessary to store both firmware and config in an SD card when the card is specified as the file which is to be loaded at startup?
- Can the ZEQUO unit be started up by loading config which is stored in the unit when an SD card containing config is inserted into the unit?
- How many groups can be created for the group pane?
- No alert is notified by the ping monitoring function although time out has occurred. Why?
- Is a console cable required to perform command transmission or logging from ZEQUO assist Plus?
ここからサブメニューです。
Panasonic Electric Works Networks Co., Ltd. > Support
> FAQs
> List of All Questions
